Please Swipe Again at This Turnstile

Last updated on: April 5th, 2022 17:ten pm

What is ESD turnstile gate system?

What is ESD turnstile gate system? ESD turnstile gate arrangement is a new type of admission control management system which combines human electrostatic test and turnstile access control management. The master components of the organization are electrostatic exam equipment(ESD Tester, ESD wristband, ESD wrist strap, ESD shoes), intelligent ESD access command equipment(ESD turnstile), and intelligent IC card (or fingerprint scanner and other biological identification), and ESD system direction software.

ESD turnstile gate system has the functions of safety, constructive, and orderly access command for the personnel in the admission command direction, and intelligent management such as testing whether the static electricity on the trunk is up to the standard; In gild to achieve a safe and user-friendly working environment, it is recommended to use ESD turnstile gate organisation and ESD turnstile from Mairs.

ESD turnstile gate organization is used to detect the static electricity of the entry personnel before inbound the anti-static work area. This arrangement is an advanced product of human body static comprehensive tester (according to GJB 3007-97, SJ / T 10694-2006, and ANSI ESD s20.20 standards), static access control equipment, and computerized management software, which tin ensure that the operators are set up for the right protection of static electricity when entering the static protection area;

Combined with the ESD turnstile gate as the access command equipment of the people flows channel, according to the authority setting of the bill of fare, there are a diverseness of entry modes (hand examination, shoe test, mitt shoe on the same side, no test). The system tin can provide an orderly and civilized way for people to enter and go out, eliminate illegal entry and exit, and rapidly control the opening of gates in instance of emergency, and organize personnel evacuation.

Since the ESD turnstile is a very important part of the ESD turnstile gate system, permit's introduce the ESD turnstile in detail.

What is ESD turnstile?

ESD Turnstile is a kind of turnstile gate that integrates with human electrostatic examination devices(ESD Tester, ESD wrist ring, ESD wrist strap, ESD shoes) to realize the security direction of special pedestrian access control. We can customize the ESD turnstile according to your requirements. Of class, We tin integrate these man electrostatic exam devices(similar ESD tester, ESD wrist ring, ESD wrist strap, ESD shoes) into our turnstile gate. We likewise provide other biometric devices, such as IC/ID carte readers, fingerprint scanners, QR code scanners, face recognition cameras, and so on. If y'all demand to integrate these devices on the ESD turnstile gate or have any questions, please inquiry us

ESD turnstile maintenance:

The ESD turnstile gate includes pedestrian turnstile gate, human body comprehensive electrostatic tester, electrostatic management host, power supply, etc. In guild to use ESD turnstile better and longer, we must understand how to better maintain the product. Of course, if yous desire to know more about the knowledge of turnstile gate maintenance, please check our other article: turnstile maintenance

1. Check whether the power cord, network cable, and grounding wire of the pedestrian turnstile gate, electrostatic tester, and management host are normal every quarter.

2. Check whether the power lights and network signal lights on the pedestrian turnstile gate control board and electrostatic direction motherboard are normal.

3. Cheque the connectedness of each interface of the turnstile machinery to forestall the firmware from loosening.

iv. Add together lubricating oil to the connecting parts and mechanism within the turnstile gate every six months to maintain a skillful lubrication state.

5. Check whether the bill of fare reader is loose and affects the sensitivity of card recognition.

half dozen. The static tester needs to be calibrated once a yr (the networked anti-static gate can be calibrated automatically through the direction host).

seven. The anti-static direction software does non need maintenance, and only needs to be changed when adding functions.

Where to buy ESD Turnstile?

If you want to purchase an ESD turnstile, delight choose the correct one from our products page, If you don't know which ane you should buy or you have any problem with the ESD turnstile gate system, y'all can contact u.s., directly click the what's app button in the lower right corner. Our sales experts will provide you with the perfect ESD turnstile gate system solution.

Nosotros also provide ESD access control system solutions, including all accessories hardware products, and software, for instance, card readers, anti-static testers, ii-pes test pedal, single and double circuit sockets, passage gate, Linux motherboard, 8-inch LCD brandish, backstage management software excursion socket, etc. If you need details of all these accessories, please contact our staff for details.

Subway Turnstile Flap Barrier Turnstile MT225

Product on sale
ESD TURNSTILE TRIPOD ACCESS Control TURNSTILE MT121-Due south

Product on auction
FLAP BARRIER TURNSTILE MOBILE TURNSTILE MT223-S

Product on sale
FLAP BARRIER GATES TURNSTILE FOR SALE MT244

Production on sale
BEST FLAP Bulwark GATE FOR Auction MT221

Production on sale
FLAP BARRIER Train TURNSTILE GATE MT243

Production on auction

Project Cases of ESD Turnstile:

With the in-depth understanding of ESD hazards in the manufacturing manufacture in recent years, many enterprises generally take anti-static measures in electrostatic sensitive stations and utilise wrist strap grounding resistance tester, electrostatic eliminator, and other equipment, and some also adopt more perfect ESD turnstile gate systems.

About ESD turnstile, MairsTurnstile has many years of feel, and nosotros have completed many applied projects for many customers. Please see the specific example pictures.

If y'all need to buy an ESD turnstile or take whatsoever questions, please contact united states of america, scan the QR code on the correct, add my what's app, or directly click the online conversation button in the lower-left corner to talk with us straight. Our customer service is generally online. If not, we will reply to your message as soon as possible.

Features of ESD turnstile:

Integrate with RFID menu and IC bill of fare automatic recognition/fingerprint recognition/face recognition.
Anti-static examination.
Existent-time upload of swiping carte du jour data.
Multimedia signage linkage monitoring function.
Warning part.
Integration of test+swipe card+brandish, the integration of stainless steel and acrylic.
Support full-screen record display, back up live voice broadcast.
Support English language linguistic communication, you tin can likewise customize to add other languages.

How does ESD turnstile work?

Swipe the RFID bill of fare or IC carte plug in the wrist strap and stand on the footboard.
Affect the test push after swiping the RFID card or IC card.
Test results are shown on the screen.
Allow or prohibit passage.

Application sites of ESD turnstile:

Grit-free workshop
Electronic assembly workshop
Precision musical instrument performance room
Electronic laboratory
Hospital control expanse
Aerospace maintenance area

Application description of ESD turnstile:

1. Realize automatic testing and automatic identification of personnel identity

2. Support left and right foot electrostatic exam, multiple identification methods, and infrared sensors

three. Provide anti-static wrist and anti-static shoe test for EPA personnel, and laissez passer the test afterwards passing the exam

Exam method and type of ESD turnstile:

1. When the employee tests that the electrostatic wrist band is OK, the gate will open automatically and the employee tin can enter the workshop.

2. When the employee tests that the electrostatic shoes are OK, the gate will open up automatically and the employee can enter the workshop.

3. When the employee has to ask his colleagues to exam the electrostatic shoes and wrist strap, the gate will open automatically and the employee tin enter the workshop.

4. When a customer wants to enter the workshop, nosotros can prepare a VIP card for him. The menu swiping gate volition open automatically and the client tin can enter the workshop.

5. When the direction staff needs to enter the workshop, nosotros can use the test-gratuitous menu, and the carte du jour swiping gate will open automatically.

Functioning steps of ESD turnstile:

1. Test preparation: the exam staff shall beginning stand on the foot pedal with their anxiety in the center of the footprints.

2. If you notwithstanding need to test the electrostatic wrist strap, delight insert it into the wrist strap test hole on the tester.

3. Employees touch the tester push in the center with their fingers

iv. Put the ID or IC card you wear close to the card reading window, and the instrument will automatically read the information on the employee card.

5. The system volition automatically carry an internal comparison, watch the LED display test results on the tester, or sentinel the LED LCD on the gate (the maximum exam time is 0-5s, which can be adjusted. If it exceeds 5S, you lot need to swipe the card again for the test)

vi. If the exam is OK according to the setting, the system will turn on the gate to allow the tester to enter. If the test result is no, delight check the detail you examination No.

7. The system automatically uploads the exam result data to the PC database for storage. The storage quantity is unlimited and will not be lost after power failure for x years.

The functions of ESD turnstile:

ane. Realize the double verification of personnel identity and static electricity test. When the bill of fare is legal and static electricity examination is passed, information technology can laissez passer the gate;

2. Flexible distribution of personnel dominance. Different authorities are assigned to people with unlike identities. For example, the part manager only needs to swipe the card legally to pass the gate, while the workshop assembly workers demand to swipe the card and pass the electrostatic examination before they can pass the gate;

three. Information technology is forbidden for unidentified persons to enter or go out at will and sneak in after them;

4. Fast and accurate statistics and existent-time query of all kinds of in and out records;

5. Reasonable and reliable design, depression noise, built-in automatic buffer device, stable operation, and long service life.

vi. Information technology has the emergency function of power-off. The restriction rod will drib automatically when it is powered off, and information technology volition be loaded automatically when it is powered on.

7. LED calorie-free with direction prompt, controller with statistical role, LED tin can brandish digital number.

8. Uniform with IC, ID, magnetic bill of fare, bar code menu, antistatic, and other smart cards.

9. With standard input and output interfaces, it tin can be freely connected with various reading and writing devices, which is a better choice for arrangement integrators

10. Can be extended to an automatic identity recognition organization to attain access control, attendance, charging, and other functions.

11. Can be integrated with other types of access control products.

ESD turnstile gate arrangement solution:

In many places where the electrostatic protection expanse (EPA) is set up, the testing of electrostatic shoes and wristbands is carried out past the traditional transmission login or supervision method, which is not piece of cake to implement or even full of errors, and information technology is hard to obtain the trust of customers and direction, which also forms a great potential loophole in the electrostatic grounding of personnel;

ESD turnstile gate system for these shortcomings, put frontward a direct and effective solution, to ensure that the operators in the EPA area, have done a expert job in personnel electrostatic grounding grooming; And combined with the turnstile gate equally the control equipment of the people menstruum channel. It can provide orderly and civilized access for people in and out, eliminate illegal access, and quickly open the gate in example of emergency to organize personnel evacuation. In the design of this solution, we fully consider the protection of production quality equally much as possible through this system.

Analysis of access control need

With the rapid evolution of the electronic industry, the quality of electronic equipment and components has been put forward with college and higher requirements. In this mode, in the early on stage of the production of electronic equipment, the electrostatic test of employees is particularly important, simply too to realize the automatic identification of employees.

ESD turnstile gate system integrates calculator technology, network advice technology, ESD technology, automated control technology, and induction carte technology to realize automatic identification of employees and rapid passing of an electrostatic exam. Information technology is suitable for the electrostatic test control of the passageway in important places such as enquiry institutes, laboratories, and factories.

Access command Security solutions

The traditional electrostatic protection equipment used in most electronic workshops can not finer eliminate the electrostatic discharge miracle, that is, electrostatic discharge (ESD), which is acquired by the static electricity carried into the operation room by the operators. In general, the workers in the workshop will not article of clothing wrist strap equipment according to the regulations, and there is no inspector to check the wearing condition.

Even if at that place is monitoring equipment, the workers can too make themselves out of the monitoring range, which leads to the meaninglessness of the fix of static electricity elimination equipment, and the static electricity tin can non be released in time, resulting in electrostatic neutralization belch, In the process of electrostatic discharge, a strong electric current is generated, and the rut is enough to completely melt the internal circuit of the semiconductor fleck;

What's worse is that just one-10th of this kind of damage will brand the whole components fail before the final test, and the remaining 90% will only cause partial impairment to the circuit, that is to say, it can make the defects completely ignored through the final test, and lead to early on-site failure later on commitment to customers.

Every bit a kind of access control system, admission control turnstile equipment tin effectively control the access personnel and orderly laissez passer through the channel organization, standardize employee management, save enterprise management expenditure and human cost, and realize the automated management of employees in and out of the workshop.

After a long time of in-depth enquiry and analysis on the sources of static electricity in the electronic manufacture, and the investigation on the needs of electronic enterprises, through many years of practical experience, nosotros have successfully integrated a ready of static electricity organisation solutions to prevent the generation of static electricity. The system can finer release the excessive static electricity on the staff, check the qualified wearing condition of the wrist strap, stop the static electricity outside the production workshop, and eliminate the hidden danger of electrostatic discharge. At present, the system has become an important ways of quality assurance for electronic manufacturing component enterprises.

Design principles:

Due to the demand for safe and efficient direction, the design of an anti-static admission control system should follow the following principles:

The practicability of the system

The content of the access control organisation should meet the actual needs, not flashy. If the i-sided pursuit of the leading nature of the arrangement, It is bound to cause too much investment and too far away from the actual needs. Therefore, The practicability of the system is the first principle to be followed. At the aforementioned fourth dimension, the front end-end products and arrangement software of the system take proficient learnability and operability. In particular, the operability enables the management personnel with primary computer operation level to primary the operation essentials of the organisation through elementary grooming, so as to achieve the functioning level of completing the duty job.

The stability of the organisation

Because the access control organisation is an uninterrupted long-term piece of work organization and is closely related to the normal operation of our electrostatic workshop, so the stability of the organisation is particularly important. The arrangement should take more than iii years of successful application experience in the market and corresponding customer groups and client service system

Arrangement security

All equipment and accessories in the admission control system operate safely and reliably, Information technology should besides comply with relevant Chinese or international safety standards, And information technology tin can work effectively in a not-ideal environment. The powerful real-time monitoring function and linkage role fully ensure the security of the user environment.

System maintainability

The maintenance of the admission control organization in the process of operation should be as simple every bit possible. The performance of the system can work when the power is turned on, The extent to which you lot can plug it in. And at that place is no need to use also many special maintenance tools in the maintenance process. From the configuration of the estimator to the configuration of the system, the configuration of the front-end equipment has fully considered the reliability of the system.

When we reach the lowest arrangement failure rate, we as well consider that even when problems occur due to unexpected reasons, we can ensure the convenient storage and rapid recovery of data, and ensure that the aqueduct can be opened quickly in case of emergency. The maintenance of the whole system is online, and the normal operation of all equipment will not be stopped considering of the maintenance of some equipment.

Description & analysis of blueprint requirements

The impact of ESD on electronic products is non only the damage of products but also the reliability of products (intermittent loss of function). It will lead to the instability of product operation and increase the number of maintenance. This situation accounts for 90% of electrostatic damage. The implementation of an anti-static access control system tin effectively foreclose the failure of reliability and other bug caused by static electricity.

The system requirements are divided into the following 3 situations:

1. The employee can laissez passer the three-stick gate but after the carte is verified to be legal. Information technology is required to display in the real-fourth dimension record whether the carte du jour verification is legal or illegal, as well every bit the record of employees passing the three stick gate;

2. Employees can pass the iii-bar brake only subsequently the bill of fare and foot static electricity test are passed. Information technology is required to display in the real-time record the records of card verification legal or illegal, the records of foot static electricity test passing or non passing, and the records of employees passing the three-bar brake;

3. Employees tin pass the three-stick brake only later on they pass the carte du jour and static test of easily and anxiety. It is required to display in the real-fourth dimension record the records of carte du jour verification legal or illegal, the records of manus static electricity test passing or non passing, the records of foot static electricity exam passing or non passing, and the records of employees passing the three-bar restriction.

Each workshop can customize the test mode flexibly co-ordinate to its ain state of affairs.

ESD turnstile gate arrangement overview

ESD turnstile gate system is mainly composed of the electrostatic tester, ESD turnstile gate, key controller, inductive card reader, power supply, remote communicator, management computer, and server. Through the access control system, the access controller analyzes the authority of the swipe card personnel, carries out the corresponding static electricity exam, and releases static electricity.

After the examination is qualified, the aqueduct will automatically release the static electricity (if the test is unqualified, the static electricity tester will automatically release its static electricity to ensure safety), and the employees tin enter the indoor condom surround to avoid the damage to electronic devices acquired by the static electricity carried in by the external surroundings.

Electrostatic tester

Electrostatic tester is the cadre component of the ESD turnstile gate system. It indirectly reflects the electrostatic index of the homo body by testing the resistance of the human torso, and then every bit to ensure that the tested person is qualified to clothing shoes, wristbands, etc. at the same time, it outputs signals to the subsequent components to drive the channel mechanism.

According to the grouping bespeak of the key controller, the menu swiper tin exist operated in four situations: hand and foot measurement, hand just measurement, foot only measurement, and no ESD detection.

ESD Turnstile

ESD detector and inductive bill of fare reader are equipped in the entrance direction of the ESD turnstile gate, and i person can pass through after the carte du jour swiping and electrostatic detection are qualified. The outside direction is as well equipped with an anterior menu reader for the company to prepare a 2-way channel.

The leave ESD turnstile gate is equipped with an out-of-office anterior card reader, which can be set to swipe the card to go out or to go out freely.

Central controller

Save the employee'due south information, decide whether the employee is allowed to pass the test co-ordinate to the card swiping signal, and send it to the electrostatic tester, and so drive the 3 roller brake mechanisms according to the output signal of the electrostatic tester.

Inductive bill of fare reader:

Receive the swipe card signal and send it to the central controller for discrimination.

Ability supply:

Provide power supply to all institutions.

Remote communicator:

The communication between the primal controller and the estimator is provided to complete the setting and data acquisition.

Management computer:

Install ESD turnstile gate arrangement management software.

Server (optional)

The existing Microsoft SQL Server database management system of the company tin can be used to install an ESD turnstile gate organization database.

The pattern thought of ESD turnstile gate system

Static electricity tests and automatic identification of personnel are realized. When the carte is verified to be legal and the static electricity test is passed (the static electricity is within the safe range), the employee can be allowed to pass through the gate.

Flexible allocation of personnel say-so. Humanized pattern, for different identities of personnel, the allocation of different permissions. For example, office managers and visitors tin can pass the gate but by swiping the menu legally, while workshop associates workers can pass the gate only after swiping the card and passing the electrostatic test.

Support left and right foot static exam. Examination the correct wearing condition of wristbands to ensure the real-time electrostatic belch when employees enter the workshop. Only after the left and correct anxiety pass the static electricity examination, tin can nosotros continue to test the hand static electricity.

Unlike readers can exist used to support a multifariousness of identification methods, including swipe card, swipe card + password, fingerprint, and then on. Employees with unlike permissions can employ different identification methods.

Time zone command. 32-time zone tables can exist set up to support holiday control.

Through the infrared sensor, the system tin accurately judge whether the employee has passed the gate.

Display and record all effect data in real-time; All in and out records are transmitted to the figurer in real-time and tin be displayed immediately in the figurer of the direction center; Cardholder (name, photo, etc.), event time, gate address, event type, and record truthfully, and the tape cannot be changed. When an alert event occurs, a striking alarm prompt box volition pop up on the figurer screen.

Monitoring of equipment operating status. Through the communication server (CS), the management center can know the operation of each piece of equipment in existent-time. When the advice of a PLC is abnormal, a striking alarm will appear.

The controller can be continued to the computer through a TCP / IP network, and the communication speed is very fast. It tin be connected to the computer in a long distance, and the cost of wiring can be reduced past using the existing LAN.

The process of ESD turnstile gate system

Subsequently testing, the boilerplate time for one person to laissez passer the anti-static access control organisation is shortened to 5-six seconds.

Test grooming: the tester shall exist prepared for a static test (mainly refers to wearing anti-static shoes) and stand on the metal pad of the tester with both feet.

Identification: the tester pastes the personal identification carte du jour close to the anterior bill of fare reader, and the reader will sound "tick" when the induction is successful. At this time, the central controller has successfully completed the identification.

Static test: after hearing the "tick" of the reader, touch the test button with the correct index finger or press the test button (according to different models) within v seconds to carry out the static test.

Access control release: when the indicator low-cal of the tester is all green and the buzzer no longer rings, the tester can pass through the tripod turnstile gate, and the tripod turnstile gate will lock once again after the ready time (generally v seconds).

Later swiping the card, you tin can go out directly, or you can go out directly without swiping the menu.

Functional Features:

Automatic identification of radio frequency did carte du jour and CIC card

The system uses radiofrequency applied science to admission the personnel data in the database in real-time, so as to quickly identify the personnel information. If yous are not registered in the arrangement, y'all tin can also identify and mention information technology.

Antistatic test

The anti-static test musical instrument tin chop-chop judge whether the tester's static ring, left foot static shoes, and right human foot static shoes come across the anti-static requirements. Each channel tin be in and out in two directions, greatly improving the utilization rate of the equipment. When personnel passes through, the organisation can automatically identify the in and out direction.

Existent-time upload of credit card data

Through TCP / IP network, the system can upload the personnel information and the resistance value data to the management and command center in existent-time, and can too automatically ship the ng information to the mailbox of the management personnel designated by each team.

Multimedia Kanban articulation control and monitoring function

A big display screen can exist installed in the access control examination channel to display the data of unqualified personnel and marker it in red for leaders and customers to lookout and verify at any fourth dimension.

Illegal card alert office

For those who practise non have a menu or whose bill of fare is illegal, when they pass through the gate aqueduct, they will immediately give an audible and visual alarm. For example, when going to and from work, illegal people and unauthorized people mix into the crowd and try to follow them. The access command arrangement can automatically place and effectively forbid foreign people from entering, and truly achieve the combination of civil air defense and technical defense.

The above is an introduction to the ESD turnstile gate organization. If y'all accept whatsoever questions about this system or you lot want to customize a special ESD turnstile gate system according to your requirements, delight do not hesitate to contact united states of america. We are always happy to serve yous.

goodridgecomang.blogspot.com

Source: https://mairsturnstile.com/esd-turnstile-gate-system.html